Emerson Research CKT9087 Скачать руководство пользователя страница 32

Страница: 32 / 40

3 1

WAKE TO BUZZER

NOTE

: Alarm 1 and Alarm 2 have different buzzer sounds.

• Alarm 1 is a “Single beep” sound.

• Alarm 2 is a “Double beep” sound.

You will be able to tell which alarm is going off by the sound that it makes.

1.) Reconfirm the wake up time and alarm mode settings for the alarm you are

using, Alarm 1, Alarm 2, or both alarms.

2.) Set the

ALM

selector switch for one or both alarms to the

BUZZER

position.

The appropriate

ALM 1

and/or

ALM 2

indicators will light up to confirm that the

alarms are set.

3.) At the selected wake up time the buzzer will sound. It will continue for one hour

and then shut off automatically.

4.) To stop the buzzer sooner, press either the appropriate

ALM 1

ALM 2

button.

The buzzer will stop but the alarm remains set and will turn the buzzer on

again at the same time on the following day (depending on the Alarm Mode

setting). To stop the buzzer and turn on the radio immediately, press the

RADIO

ON/OFF

button instead of the

ALM 1

ALM 2

button.

5.) If you do not want the alarm to turn the buzzer on the following day, set the

appropriate

ALM

selector to the “

OFF

” position.

RADIO AND BUZZER OPERATION

You may also set one alarm for wake to radio and the other for wake to buzzer.

Just set the

ALM 1

and

ALM 2

selector switches to the desired positions.

SNOOZE ALARM

After the radio or buzzer alarm sounds in the morning you may press the

SNOOZE

Bar for a few more minutes sleep. The respective

ALM

indicator will flash.

The alarm will stop for approximately 9 minutes and then turn on again. You may

repeat the Snooze operation up to seven times if desired, but after the seventh

time the alarm will not turn on again.

CKT9087_090606.p65

6/9/2006, 10:56

Содержание CKT9087









































Результаты поиска

Содержание CKT9087

Отзывы:

Похожие инструкции для CKT9087

Бренды по названию

Популярные бренды

Emerson Research CKT9087, Руководство пользователя

Результаты поиска

Содержание CKT9087

Отзывы:

Похожие инструкции для CKT9087

Бренды по названию

Популярные бренды