1 7
2.) Press either the
UP
or
DOWN
button to select the first digit of your area code.
Example: 9. Then press the
DELETE
button once to enter it in the memory.
The flashing cursor moves to the second digit.
3.) Press
UP
or
DOWN
to select the second digit, then press
DELETE
to enter it
in the memory The cursor moves to the third digit.
4.) Press
UP
or
DOWN
to select the third digit, then press
DELETE
to enter it in
the memory. The display will change from
AREA CODE?
to
LCD CONTRAST
.
The default LCD contrast level is “
3
”.
5.) Press the
UP
or
DOWN
buttons to adjust the contrast level between “1” (lowest
contrast) and “5” (highest contrast). The display contrast will immediately change
to match your selection. Press the
DELETE
button to memorize your selection.
The display will return to the
TOTAL
and
NEW
calls screen.
Note
: To change the Area Code or Display Contrast settings at any time,
depress and hold the “
UP
” button for at least 3 seconds to return to the Area
Code screen and then repeat Steps 1 through 5 above.
CKT9087_090606.p65
6/9/2006, 10:56
17
