Emerson Quiet Kool 12K, Руководство по установке

Страница: 96 / 108

ON
OFF
ON
8
Operation instructions
SLEEP mode
Note: When using IFEEL mode, advice to put the remote in the place where the indoor unit can
receive the signal easily.
Note: When stopping the air conditioner, advice to cancel the IFEEL mode so as to save energy.
In IFEEL mode, the temperature sensor built in remote controller is activated. It can
sense its surrounding temperature, and transmit the signal back the unit, the unit
can adjust the temperature so as to provide maximum comfort.
IFEEL mode
IFEEL mode
SLEEP mode
SLEEP mode can be set in COOLING ,HEATING mode. or DRYING
This function gives you a more comfortable environment for sleep.
The appliance will stop operation automatically after operating for 8 hours.
Fan speed is automatically set at low speed.
Note: Heating is NOT available for cooling only air conditioner.
Set temperature will rise by 2 ) if the appliance operates in cooling °F(2 ℃ mode at most
for 2 hours constantly, then keeps steady.
Set temperature will decrease by 2
) °F(2 ℃ at most if the appliance operates in heating
mode for 2 hours constantly, then keeps steady.
SLEEP mode 1:
Set temperature will rise by 2 ) if the appliance operates in cooling
constantly, decrease by 1 °F(1 ℃ ) after 6 hours, then decrease by 1 °F(1 ℃ ) after 7 hours.
°F(2 ℃ mode for 2 hours
Set temperature will decrease by 2 °F(2 ℃ ) if the appliance operates in heating mode for
hours constantly, rise by 1 °F(1 ℃ ) after 6 hours, then rise by 1 °F(1 ℃ ) after 7 hours.
SLEEP mode 2:
Set temperature will rise by 1 ) if the appliance operates in cooling
hour, rise by 2 °F(2 ℃ ) after 2 hours, then decrease by 2 °F(2 ℃ ) after 6 hours,
decrease by 1 °F(1 ℃ ) after 7 hours.
°F(1 ℃ mode for 1
Set temperature will decrease by 2 °F(2 ℃ ) if the appliance operates in heating mode
for 1 hour , decrease by 2 °F(2 ℃ ) after 2 hours, then rise by 2 °F(2 ℃ ) after 6 hours,
rise by 2 °F(2 ℃ ) after 7 hours.
SLEEP mode 3:
Set temperature will keeps steady.
SLEEP mode 4:
Each time SLEEP button is pressed, the operation mode is changed in sequence:
SLEEP 2 SLEEP 3 QUIT SLEEP MODE SLEEP 4 SLEEP 1
Note: Press SUPER ,SMART, MODE,SLEEP or FAN button cancel SLEEP mode.