emerio WK-122248, Инструкция по эксплуатации

Страница: 9 / 63

- 8 -
CLEANING AND MAINTENANCE
1. Always let the kettle cool down first and disconnect the appliance from the power outlet before
cleaning. Never immerse the kettle or base into the water or other liquid to avoid electric shock.
2. Never immerse the kettle, power cord or power base in water, or allow moisture to contact with these
parts.
3. Wipe the appearance of kettle and base with a mild and damp cloth or cleaner, never use a corrosive
cleaner. CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the
kettle.
4. Do not immerse the kettle lid into the water and wipe it with a wet cloth.
5. The power cord can be stored under the power base when the kettle is not used.
Removal of mineral deposits
Your kettle should be periodically descaled as the mineral deposits in tap water may form scale on the
bottom of the kettle so as to cause the operation less efficiency. You can use the commercially available
descaler and follow the instructions on the package of the descaler. Alternatively, you may follow below
instructions using the white vinegar.
1.
Fill the kettle with 3 cups of white vinegar, and then add water to the amount so as to cover the bottom
of the kettle completely. Leave the solution in the kettle overnight.
2. Discard the mixture in the kettle, fill the kettle with clean water, boil and then discard the water. Repeat
several times until the odor of vinegar has been flushed away. Any stains remaining inside the spout can
be removed by rubbing with a damp cloth.
To clean the filter
Hold and pull the ring (A) out from the kettle body (fig.1&2). Rinse the filter under running water. Use a
brush to clean it if needed. Push the ring back to the kettle body (fig.3-5).
fig.1 fig.2
fig.3 fig.4 fig.5
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power: 1850-2200W