emerio WH-125971, Инструкция по эксплуатации

Страница: 9 / 86

- 8 -
OPERATION
Plug the appliance into an appropriate electrical outlet. Press the p ower switch to the position “I” to connect
the power. The room temperature will be illuminated on the LED display. The appliance is on standby. After use,
press the power switch to the position “O” to disconnect the power.
1. Press the ON/Standby button to turn on the appliance. Press the button again to turn the appliance into
standby. Press the one-start button to fast start the operation, the appliance works in high heating and
swing mode by default. Press this button again, the appliance will turn into standby too. If the appliance
has worked before with the heating function, its fan keeps working for 30 seconds with a countdown on
the display. In standby, the room temperature is still displayed.
2. Use the remote control for all the functions. It should be directed towards the LED display while using.
3. Select the heating level among low heating (one indicator light on), high heating (two indicator lights
on) and no heating (both indicator lights off ). If you don’t set the d esired temperature, the
appliance will keep running in the heating level you select.
4. Set the desired temperature by pressing the temperature setting button. Adjust the value by buttons “+”
“
- ”. Press the button “OK” to confirm th e set temperature. The temperature range you can set is 18 –
45
℃
.
5. To cancel the temperature setting: If you haven’t set the desired temperature, press the temperature
setting button again; if you have set the desired temperature, press the temperature setting button first
then pres s the cancel button “ ”
Note:

When the set temperature is lower than the room temperature, the appliance stops heating.

When the set temperature is 1-2
℃
higher than the room temperature, the appliance runs in low
heating.

When the set temperature is 3
℃
(or more) higher than the room temperature, the appliance runs in
high heating.
6. You can also set the timer to let the appliance automatically enter into standby or make the airflow swing.
See the table in the section “Remote contr ol ” for reference.
7. This appliance also supports open window detection and week timer. See the detailed introduction below.