Spraying function: Press the spray button to moisten a spot to be ironed. Water will come out of the spray
nozzle.
Steam Function: Turn the steam control knob to the required position, steam starts coming out from the holes
in the soleplate.
Burst of steam: Turn the temperature regulator to the position “MAX”. The indicator light will go off when the
required temperature is reached. Then press the burst of steam button. This function provides an extra amount
of steam to remove stubborn wrinkles. For optimal use, please allow the appliance to have a rest of 3 - 5
seconds between each press.
“Burst of steam” can also be applied when holding the iron in vertical position, which is useful for removing
creases from hanging clothes, curtains, etc.
The iron surface must always be kept in an upright position.
To turn off, turn the temperature regulator counter-clockwise to “OFF” and pull out the power plug.
Turn the appliance upside down and carefully pour the remaining water out of the water tank. Carefully shake
the appliance.
Press the spray button to allow possible remaining water to come out more easily.
Notice: With conventional steam ironing, water may leak from the soleplate if a too low temperature has been
selected. If this happens, turn the temperature regulator to the advised position. Steam will recommence as
soon as the appropriate temperature has been reached.
SELF-CLEAN FUNCTION
You can use the self-clean function to remove scale and impurities.
The self-clean function should be used at least once per month.
If the water is very hard in your area, use the self-clean function every two weeks.
Make sure the appliance is unplugged.
Set the steam control knob to position “O“.
Fill the water tank to maximum level.
Select the maximum ironing temperature.
Put the plug in the wall socket.
Unplug the iron when the temperature indicator light goes off.
Hold the iron over the sink, press and hold the self-clean button and gently shake the iron to and fro.
(Steam and boiling water will come out of the soleplate. Impurities and flakes (if any) will be flushed out).
Release the self-clean button as soon as all water in the tank has been used up.
Repeat the self-clean process if the iron still contains a lot of impurities.
CLEANING AND MAINTENANCE
Before cleaning the iron ensure it is disconnected from the power supply and has completely cooled
down.
Deposits on the soleplate may be removed with a rough cloth soaked in a vinegar water solution.
The casting may be wiped with a damp cloth and then polished with a dry one.
Do not use abrasives on the soleplate.
Keep the soleplate smooth. Avoid hard contact with metal objects.
TIPS
Which type of water to use?
Your appliance has been designed to function with untreated tap water. If your water is very hard, it’s possible
to mix untreated tap water with store bought distilled or demineralised water in the following proportion: 50%
tap water / 50% distilled water.
Содержание SI-107495.5
Страница 1: ......
