![emerio SB-120752 Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/emerio/sb-120752/sb-120752_instruction-manual_2400704007.webp)
- 6 -
OPERATION
1.
Insert the power plug in to a designated outlet, the indicator light goes on.
2.
The water will heat in about 45 seconds and the indicator light will turn off. Now the appliance is ready for
use.
3.
Put garment on a hanger. Pull lightly on the garment with one hand. Hold the appliance in the other hand,
direct the steam nozzle toward the garment, and press the steam button to control the steam.
4.
Move the appliance up and down and/or back and forth along the garment to release wrinkles.
5.
After use, unplug the appliance and empty the water tank when the appliance has completely cooled down.
Note:
1)
There may be little drops of water or a small amount of steam in the steam nozzle when first plug in. This
is normal. Do not press the steam control button before the indicator light turns off.
2)
Brush attachment can be used to improve the steam penetration to thick and heavy fabric.
CLEANING
1.
Before cleaning, ensure the appliance is disconnected from the power supply and has completely cooled
down.
2.
Wipe the appliance with a damp cloth and then polished with a dry one.
3.
Never use souring pads, abrasive cleaning agents or aggressive liquids such as alcohol, petrol or acetone to
clean the appliance.
If problems occur?
The appliance does not
produce any steam.
The appliance has not heated up
sufficiently.
Let the appliance heat up for approx. 45
seconds. When the light goes out, the
appliance is ready for use.
The water level in water tank is too
low.
Unplug the appliance and refill the water
tank.
The water tank is not in place
Insert the water tank properly.
Содержание SB-120752
Страница 1: ......