emerio MC-126196, Инструкция по эксплуатации

Страница: 6 / 43

- 5 -
MC-126196 EN
GENERAL DESCRIPTION
1.
On/off button
2. Motor unit
3. Jar lid
4. Blade assembly
5. Jar
6. Blade support
BEFORE USE
1. Remove the appliance from the packaging.
2. Take care when handling sharp blades.
3. Clean the appliance as described in section “ CLEANING AND MAINTENANCE ”.
USE
1. Attach the blade assembly onto blade support in the jar and pour in the food to be chopped. Never
exceed the MAX line indicated on the jar. Hard food must be cut into small pieces (about 2cm). Otherwise,
the motor may block.
Note: This blade assembly is equipped with two sets of blades. Rotate the upper set of blades anti-clockwise,
you can separate the two sets of blades. You can use either one set or two sets of blades when processing
food. Check and tighten the upper set of blades before use if two sets of blades are applied.
Caution: Handle the blades with care! Only touch the plastic part when separate or assemble the two sets of
blades.
2. Place and rotate the jar lid onto the jar (note the bulge and groove). Place the motor unit onto the jar lid.
Make sure the edge of the motor unit and the jar lid is fully aligned.
3. Put the plug into an appropriate power outlet. Press the on/off button for processing. The appliance only
works when the on/off button is pressed.
4. After use, take out the plug from the power outlet. Make sure the blades stop rotating completely before
removing the motor unit, jar lid and blade assembly.
Note:

Always make sure the motor unit is in its place; otherwise, the unit will not function.

Do not operate for more than 1 minute at a time. Stop and cool for 2 minutes then resume.

Please make sure the appliance rest more than 2 minutes between any two operations. After working 3