emerio FN-114894.2, Инструкция по эксплуатации, Страница: 5 / 41

- 4 -
FN-114894.2 EN
PARTS DESCRIPTION
1.
Clamping ring
2. Front guard
3. Blade fastening screw
4. Fan blade
5. Guard fastening screw
6. Rear guard
7. Motor shaft
8. Shaft pin
9. Indication screen
10. Control panel
11. Fastening screw
12. Height adjustment pipe
13. Fasten set
14. Standing shaft
15. Standing base
16. Washer
17. Base locking screw
18. Remote control
Control panel illustration
a) “ ”: On/off button
b) “ ”: Speed button
c) “ ”: Timer button
d) “ ”: Swing button
Remote control
This unit has a remote control. O
ne piece of CR2025 battery will be provided with the remote control. Before
starting to use the remote control, remove the plastic protection from the battery. If you want to change the
battery, please refer to the instruction behind the remote control. If it is not in use for a long time, please take the
battery out of the remote control. The functions of the remote control buttons are the same as the functions of
the buttons on the control panel.
ASSEMBLING INSTRUCTIONS
1.
Attach the standing shaft onto the standing base. Place the washer and base locking screw. Rotate the base
locking screw to fix the standing shaft firmly.
2. Loosen the fasten set and pull out the height adjustment pipe. Tighten the fasten set.
3. Link the fan main body and the height adjustment pipe together by the fastening screw and then fix them.
4. Remove the blade fastening screw and guard fastening screw from the motor shaft spindle.
5. Fit the rear guard by positioning with the location pins. Secure the guard onto the motor body with the guard
fastening screw.
6. Place the fan blade onto the motor shaft by matching the slot with the shaft pin. Fix the blade by tightening
the blade fastening screw in a counter-clockwise direction. Check that the fan blade can rotate freely by
turning it with your hand.