emerio CFR-126353, Инструкция по эксплуатации

Страница: 7 / 76

- 6 -
CFR-126353 EN
TRANSPORT AND PACKAGING
Transport the appliance
Transport the appliance, if possible, in vertical position. Otherwise, it is absolutely necessary to allow the
appliance standing upright for four hours before installation
” Prior to first use ” . Protect the appliance during
transport against weather influences.
NOTE: The appliance has wheels which facilitate the transport and installation of the appliance.
Unpacking the appliance

Remove the appliance from its packaging.

To prevent hazards, check the appliance for any transport damage.
NOTE: Production residue or dust may have collected on the appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
APPLIANCE EQUIPMENT
Appliance overview
1.
Integrated lid handles
2. Freezing basket
3. Water discharge opening
4. Temperature control
5. Control lamp
6. Ice scraper
INSTALLATION
Conditions for the installation location

Good ventilation is required around the appliance to dissipate the heat properly and to guarantee efficient
cooling operation at low power consumption. Enough clearance is necessary.
-
Gap to the back approx. 50-70 mm, to the side walls each approx. 100 mm;
- Place the appliance so that the appliance lid can open without being impeded.

Only install at a location with an ambient temperature suitable for the climate class of the appliance. The
climate class can be found under "TECHNICAL SPECIFICATIONS".

Place the appliance on a steady and safe surface. If the appliance is not horizontally leveled, adjust the
feet accordingly.