VOLUME
CH 2
VOLUME
CH 1
CH 2
OUT
MAIN/MIX
OUT
STEREO
IN
Dual Channel Pro ST
2 C H A N N E L P R E A M P
OUT FROM GUITAR
STEREO GUITAR CABLE
IN
STEREO
GUITAR CABLE
OUT
GRAPHTECH PIEZO SIGNAL
(STANDARD MONO GUITAR CABLE)
OUT
FISHMAN
HUMBUCKERS SIGNAL
(STANDARD MONO GUITAR CABLE)
OUT FROM GUITAR
STEREO
TO x2 MONO
GUITAR CABLE
IN
GRAPHTECH
PIEZO
SIGNAL
IN
FISHMAN
HUMBUCKERS
SIGNAL
VOLUME
CH 2
VOLUME
CH 1
CH 2
OUT
MAIN/MIX
OUT
STEREO
IN
Dual Channel Pro ST
2 C H A N N E L P R E A M P
OUT FROM GUITAR
STEREO GUITAR CABLE
IN
STEREO
GUITAR CABLE
OUT
GRAPHTECH PIEZO SIGNAL
(STANDARD MONO GUITAR CABLE)
OUT
FISHMAN
HUMBUCKERS SIGNAL
(STANDARD MONO GUITAR CABLE)
OUT FROM GUITAR
STEREO
TO x2 MONO
GUITAR CABLE
IN
GRAPHTECH
PIEZO
SIGNAL
IN
FISHMAN
HUMBUCKERS
SIGNAL
CABLING
- STEREO GUITAR CABLE
In order to send the signal of the Humbucker and Piezo pickups to individual sources (i.e Electric Amp and Acoustic Amp/PA),
you will need a “Stereo Guitar Cable”.
• The simpliest solution is to use a “Stereo to x2 Mono Cable”, with Stereo 1/4 inch Jack one end, splitting to 2 Mono 1/4 inch Jacks.
• Alternatively, we recommend the “K&K Dual Channel Pro ST”. This 2 channel preamp allows for a Stereo to Stereo 1/4 inch input and two standard
mono guitar cable outputs. Using this preamp will protect from any signal loss and allow added volume control.
PLEASE NOTE: We have used this option to
illustrate all setup options in this document.
STEREO TO X2 MONO CABLE
K&K DUAL CHANNEL PRO ST
