14
CONNECTING TO THE COLD WATER SUPPLY LINE.
Fig. 11. Connection to the cold water supply line
u
Block the flow of cold water to the sink, and then open the cold water tap on the faucet to
relieve pressure in the pipe;
u
If necessary, tighten threaded connections.
u
Unscrew the nut on the T-bend and put it on the connecting tube;
u
Fit the pipe tightly onto T-bend fitting and tighten the nut;
u
Check that all connections are secure.
Attention! When connecting these elements, do not overtighten
the connections! This can lead to the destruction of the T-bend or tap,
including a hidden defect (with long-term consequences). The amount
of waterproofing material used (FUM tape, etc.) should not be
excessive! Consult a professional plumber to install these items on a
cold water main. In case of any mechanical damage to the connection
unit due to improper installation and use, warranty claims may be
rejected.
Fig. 12.
Ball T-bend with
water supply control tap
