SMOKE ALARM CONTROLLER
USER MANUAL
DESCRIPTION
The Emerald Smoke Alarm Controller provides an effortless method
of testing, silencing and locating triggered smoke alarms without the
need to reach up to the alarms on the ceiling.
The emerald Smoke Alarm Controller connects via RF (radio frequen-
cy) to Ranger and Vulcan smoke alarms also fitted with an RF module.
MODEL NUMBER: EP-SA-CONT-RF
Thank you for choosing Emerald Alarms.
This leaflet contains important information on the correct
installation and operation of your smoke alarm controller.
Please read the information thoroughly to familiarise
yourself with its functionality and retain it for future
reference.
POWER SUPPLY:
CR2450
BATTERY LIFETIME:
3 years
FREQUENCY: 433MHz
OPERATING TEMPERATURE: 0 ~40°C
COMPATIBLE WITH:
RF Ranger Series and Vulcan
Series with RF Module
RF STANDARD:
AS4268
EMC PERFORMANCE:
EN 301 489-1, EN 301 489-3
SMOKE ALARM CONTROLLER FUNCTIONALITY
Test Button
Locate Button
Red
LED Light
Yellow
LED Light
Silence
Button
TEST
Press the test button once and all
interconnected alarms will beep for
7 seconds.
LOCATE
Press the LOCATE button to silence all
alarms except the activated one
SILENCE
Press the SILENCE button and all alarms
will be silenced for 8 minutes
ALARM
INDICATOR
In the event of a fire, the Alarm Indicator
will flash twice per second
LOW BATTERY
INDICATOR
When the smoke alarm controller is
running low on battery, the yellow LED
will flash once every 9 seconds.
INSTALLATION
To ensure the best wireless transmission to connected smoke alarms
we recommend wall mounting the smoke alarm controller 1.4m above
floor level.
ACTIVATION
Press and hold the silence button for 5 seconds until the red and
yellow LED flash at the same time and then release the button.
This will activate the device and is ready for pairing.
CAUTION:
The smoke alarm controller only needs to be activated the
first time you use it.
