8
Tulip101
3.
Insert the AC end of the power adapter
into the electrical outlet.
4.
Manual charging:
Place the vacuum robot
on the charger and ensure that the charging
contact on the underside of the unit is in
contact with the charging contact of the
charger.
Auto charging
: Use the
2/Qpxfs!po0pgg
3/Txffq!Ujnf
5/Ofhbujwf!Jpot
4/Bvup
6/Epdljoh
2/Vq
3/Epxo
5/Sjhiu
4/Mfgu
6/Foufs
7/Tqsjbm
9/Tdifevmjoh
8/Dmpdl
:/Wbdvvn
21/Mbohvbhf
button on
the remote control and display panel to
return the vacuum robot to the charger
automatically (the main power switch must
first be turned on).
5.
Make sure that the status indicator of the charger is functioning
correctly.
Not lit:
Make sure the power adapter is properly installed and check to see if the external
power supply is working properly.
Fully lit:
Normal.
Flashing:
This indicates a short-circuit. Remove the power cord and any objects near the
charger and reconnect the cord.
6.
When the unit begins to play the
Begin Charging music
, battery charging has
started.
• When installing the charger, pay attention to the surroundings and angle as
well as the recommended clearance radius, and check to see if the power
adapter cable is properly bundled.
• If the vacuum robot has less than 30% battery power during the vacuuming
process, it will automatically return to the charger to recharge itself.
• If the working time is set to infinite, the vacuum robot will remove itself from
the charger after a full recharge and continue to carry out its cleaning task.