Tulip101
3
Package Contents
Vacuum cleaner unit
(with battery)
Charger
Power adapter
Cleaning brush
(installed on vacuum
cleaner dustbin)
Nano Silver HEPA filter
(consumable)
Side brush
(consumable)
(installed on vacuum
cleaner unit)
Remote control
(battery included)
High-efficiency
cleaning cloth
(consumable)
Quick Start Guide
Using Tulip for the First Time
ON
ON
1. Turn on the main power switch
2. Charging the robot: Follow the instructions outlined in the
"
Installing the Charger
" section to the right and install
the charger properly. Then place the robot manually on the
charging base to begin charging.
At this point the "Power Button " will begin to flash. Allow
the robot to be fully charged until the indicator light on the
"Power Button
" is fully illuminated.
3. Press the "Sweep Button
" to start the robot's automatic
sweeping function
The default cleaning time of Tulip is 30 minutes. You can
also manually set the start time and the duration of the
sweeping function. For more information, consult the
"Setting the time and scheduled cleaning" section in the
User Manual
.
Sweep mode
Turn on the power switch and the machine will play a tune. Then
press the "Sweep Button " button to begin cleaning.
If no actions are taken after 10 seconds, the robot will enter the
power-saving mode. The robot will resume operation when the
"Power Button " is pressed.
Pressing the "Power Button
" while the robot is
sweeping will cause the unit to pause. The robot will
resume cleaning if there are no further instructions after
three seconds.
Vacuum Robot
User Manual
Quick Start Guide