Emed UM750, Инструкция по эксплуатации

Страница: 23 / 25

7. Dry the inside, passing a dry cloth gently over the entire
surface of the appliance.
8. Reposition the steam duct in its seat on the inside of the tank
turning it anti-clockwise and re-insert its cover.
9. Reposition the lid.
10. If the appliance is not to be used for a long period, after
cleaning, dry all parts of the unit immediately, then store it in a
dry and protected place.
External cleaning of the appliance
Clean the outer parts of the appliance using a soft cloth. Do not
use abrasive cleaners, alcohol, solvents or similar products which
could cause irreparable damage to the surfaces of the appliance.
Warning!
1. Do not immerse the appliance in water or other liquid. Do not
place the appliance under water or use near jets of water; if
electrical parts come into contact with water, do not use the
appliance and contact your retailer or a service centre authorized
by the distributor.
2. Keep water away from the power cord (G).
3. Do not scrape the heating unit (J) and do not use chemicals or
abrasives to clean it.
4. Any repairs must only be performed by a service centre
authorized by the distributor.
PROBLEMS AND SOLUTIONS
Problem
a) The humidifier does not work
b) The appliance is very noisy
c) Strange smell Solution
a)
1) Check that the power cord (G) is connected to the socket.
2) Check that the switch (A) is in the on position (I).
3) Check that there is enough water in the tank (K).
4) To reactivate the production of steam after a cycle of use, always first
switch off, then wait for the heating element to cool down sufficiently, then
switch the appliance back on via the switch (A).
b)