Emec LOTUS MINI, Руководство по эксплуатации

Страница: 41 / 72

9
4. Installation
Warning:
•
For the operation of the LOTUS generator the absolute observance of the national and local
regulations is required. The operator is liable for the observance of the local safety instructions.
•
The generator must be installed and started up in accordance to the regulations in this manual.
•
The usage of installation parts not approved by the manufacturer or supplier is prohibited.
•
The operation of the generator is allowed only with suitable safety-valves approved by the
manufacturer. The contempt of this regulation results the ultimate loss of any warranty claims!
•
Before starting works at the plant decompress all parts of the system.
•
The plant never has to work against closed valves because of the risk of bursting hoses or
pipes.
•
Disconnect the power supply before opening the controller housing.
•
Take care of all national regulations during installation!
4.1 General requirements to the installation location
Notice
•
The plant must not be placed outdoors.
•
The plant must be protected against unauthorized access.
•
The installation location must be protected against sunlight and frost and well ventilated.
•
For temperatures less than 10° C suitable tempering systems are required.
•
It must be possible to carry the chemical cans to the plant without any restrictions.
•
An escape route is stringent required!
•
The plant must be mounted onto a vertical solid wall without tensions.
•
The plant must be mounted in a way that no vibrations can be produced.
•
Take care of free entrance from all sides for the operation and maintenance!
•
A tap-valve and a lockable floor gully should be present for the risk-free removal of spilled
chemicals.
•
A fuse-protected power-supply (230 V CE-connector, 16 A) is required.