4
GENERAL DESCRIPTION
“DIN Digital CD” measures and controls Conductivity in industrial process. It is possible to set two
ON/OFF setpoints and a current signal for connecting a chart recorder or a metering pump. It is
possible to set the current output on 0
÷
20 or 4
÷
20 mA. LCD backlight display facilitates reading in
high luminosity conditions. The instrument is cased into a plastic box for DIN mounting.
CONTROL PANEL
Into normal operating mode press “UP” or “DOWN” key for instrument’s details.
Use keyboard (up, down, left and right) to make a selection or change set values. Press the “RIGHT” key to go back
in previous menu or cancel entered data.
The “Enter” key confirms the selection.
Press “RIGHT” key for about 4 seconds to switch off the instrument (the display shows OFF). Repeat the sequence
to return to the normal operating mode.
To reset the instrument (restore default settings) unplug power supply and keeping pressed “UP” and “DOWN” keys, plug
in power supply. The instrument will show “Checksum Error- Press any key”. Press any key to continue.
Display
Display
Display
Display
Display
LCD backlight display
facilitates reading in
high luminosity
conditions. It provides
constant indications
regarding operating
conditions and
equipment status.
Introduction
A convenient keypad
allows easy and quick
access to the menu for
easy programming and
calibrating operations.
K
K
K
K
Keyboard
eyboard
eyboard
eyboard
eyboard
“RIGHT” (ON/OFF - ESC) key
“ENTER” key
E
UP” key
“DOWN” key
100 uS
1on 2--
SetPoint status. Ex:
“1ON” setpoint 1 is
active.
“2--” setpoint 2 is
not active.
