EMD Aquastar AQV21, Информация по установке, Страница: 15 / 36

5.2.2 Installing the solvent bottle
a) Open the solvent bottle, place the flat seal in position
and screw on the screw top.
b) Loosen the threaded sleeve on the screw top, push the
dis pens ing tube through the screw top and down to the
bot tom of the bottle and tighten the threaded sleeve. (An
O-ring is located in the bushing to guarantee leak tight-
ness.)
c) Screw the other end of the dispensing tube with the
adjust ing sleeve into the left-hand opening of the three
hole adapter, at the titration stand.
d) Fill a drying tube fitted with a molecular sieve and press
into the screw top of the bottle.
Part Description
A Drying tube
B Threaded sleeve
C Screw top
D Flat seal
E Dispensing tube
F Adjusting sleeve
G Teflon seal
Check all drying tubes and closing points once again for firm seating in order to ensure that the system
is leaktight.
Volumetric Titrator 15
Installation (components)