39
STANDARD ACCESSORIES FOR MORTISING AND SPINDLE MOULDING
1.
Mortise and Moulding Table
2. Clamping Ring
3. Length Stop
4. l
pair Wood Clamps
TO PREPARE THE MORTISE ATTACHMENT FOR U
Remove Bar Support Bracket from basic
machine.
Place Length Stop and Table Assembly and
Lever Clamp over bars.
Fit Lever to table.
Replace Support Bracket and secure.
Fit both Wood Clamps to table.
Screw Chuck into position on motor
spindle and fit Mortise Slotting Bit
(up to 1/2
11
diameter).
Secure work in hand to table by means
of wood clamps.
Adjust depth of slot with Length Stop.
Height adjustment is <:�rried out by
means of the hand whee I •
Adjust length of slot by means of the stop spindle and knurled nuts. (Always fix knurled nuts
counter-wise).
It is advisable to cut the mortise by repeat cuts of 1/2
11
until the ful I depth is obtained.
TO PREPARE MOULDING ATTACHMENT FOR USE
IMPORT ANT
! ·
Moulding Head
M60.25. l
M60.25.2
;'J\oulcli,19
1
,·he l"Cible musl be secure:,iy clurnpcd,
\;\/t·,1·k
by h
Ci
nd
u
Remove both wood clamps and exchange
with hold-down clamp (special accessory).
Screw on Moulding Head to spindle of
motor.
Fix Moulding Table in position and
adjust depth and height as required.
1.
Secure Moulding attachment with
Toggle Screws to bars of basic
machine.
2.
Fix Moulding Table in adjustable
position by means of knurled nuts
on stop spindle.
