EMC2 DAE5S, Руководство пользователя

Страница: 1 / 11

This document describes how to install an optional 25-slot disk-array enclosure (DAE5S)
in a VNXe system.
Before you start
Before you begin the this procedure, refer to your EMC VNXe™ online help (Servicing your
system > Adding or replacing faulted hardware components > Add a new hardware
component) for instructions on how to handle hardware components. Review the Disk
handling cautions.
The enclosure is heavy and should be installed into a rack by two people. To avoid
personal injury and/or damage to the equipment, do not attempt to lift and install the
enclosure into a rack without a mechanical lift and/or help from another person.
Tasks to install a DAE5S
◆
Task 1: Verify shipping package contents .................................................................. 2
◆
Task 2: Remove the filler panels ................................................................................ 3
◆
Task 3: Install the rails for the disk-array enclosure.................................................... 3
◆
Task 4: Install the disk-array enclosure in the cabinet/rack........................................ 4
◆
Task 5: Install disk modules ...................................................................................... 6
◆
Task 6: Install the DAE5S bezel ................................................................................. 7
◆
Task 7: Attach AC power cords................................................................................... 8
◆
Task 8: Attach the expansion (back-end) cables ........................................................ 9
◆
Task 9: Verify the operation of the new DAE5S......................................................... 11
EMC
®
VNXe
Installing an Optional 25-Slot Disk-Array Enclosure
(DAE5S)
P/N 300-013-731
REV 01