EMC SVR-I1U-1208, Руководство по установке и обслуживанию

Страница: 28 / 30

Figure 30 Installing the bezel
CL4964
Powering up the server
Power up the server as described in the documentation for your product.
Removing the slide rails from the cabinet
If you ever need to remove the rails from the cabinet, use the procedure that follows.
Procedure
1. On each rail, remove the small stabilizer screw that secures the rail to the rear
channel ( Figure 31 on page 28 ).
Figure 31 Removing the rear stabilizing screws
CL4854
2. Release each rail from the channels ( Figure 32 on page 29 ):
a. At each rail end, push and hold the alignment posts together.
b. Slide the rail out of the channel, and remove it from the cabinet.
28
EMC SVR-I1U-1208 Server Installation and Maintenance Guide