EMC Ionix SCA, Быстрый справочник по установке

Страница: 8 / 12

8 8
2. Slide the white disconnect tab forward to release the inner rail
from rest of the assembly, and then remove the rail.
Figure 3 Removing the inner rails from the rail assembly
Attaching the inner rails
Figure 4 on page 8 shows how to attach inner rails to each side of the
appliance.
1. Align the protruding rail notches with the connection studs on the
appliance.
2. Push the rail along the appliance until the studs fit securely into
the notches; an audible click indicates that the rail is secure.
Figure 4 Attaching inner rails
Installing the universal rails in the cabinet
Figure 5 on page 9 describes how to mount each rail in the cabinet.
1. Pull the middle rail out and into the locked position. Use the
exposed middle rail for leverage as you attach the assembly.
2. From the front of the cabinet, position the alignment pins and
release bracket over the rear cabinet mounting channel. Insert the
alignment pins on the rail assembly into the rear channel holes for
the selected 1U (1.75”) of cabinet space. Push the assembly
backwards onto the channel; an audible click indicates that the
connection is secure.
3. Pull the front alignment pins into position securely in the cabinet’s
front channel. An audible click indicates that the rail is firmly
attached to the channel.
CL4346
Click!
CL4347