EMC Connectrix DS-24M2 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 14

EMC Connectrix DS-24M2 Скачать руководство пользователя страница 14

14

EMC Departmental Switch DS-24M2 Installation Guide

Installing Latch Brackets or Ball Studs

Copyright © 2002 EMC Corporation. All Rights Reserved.

EMC believes the information in this publication is accurate as of its publication date. The information is subject to
change without notice.

THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS." EMC CORPORATION MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS
PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.

Use, copying, and distribution of any EMC software described in this publication requires an applicable software
license.

Trademark Information

EMC

2

, EMC, CLARiiON, and Navisphere are registered trademarks and Access Logix, SnapView and MirrorView are trademarks of EMC Corporation.

All other trademarks mentioned herein are the property of their respective owners.

«
...
12
13
14

Содержание Connectrix DS-24M2















Отзывы:

Нет отзывов