EMC-PARTNER 103514, Руководство пользователя

Страница: 48 / 112

MIG-OS-OS1_MIG0603OS1_MIG0603OSI M odular I mpulse G enerator
48/112
loaded test loaded test
test parameters tests parameters
back to
programmed
tests back to
selectable tests actual showed
display
ramp selection
v, f, t,
further settings
like EUT power
voltage, EUT
failed criteria more test
parameters
•
Close the safety circuit (auxiliary connector placed, emergency button not pressed) the red lamp
signalise "Safety Circuit closed".
With the
"RUN" button the test with the default values will be started. Press again the „RUN“ button to stop
the test.
6.1.5 Tester 0.5J, 500 Ohm
type of equipment Software version serial number
selectable tests selectable tests
programmed test in a
Setup dialogue lines gives hints for to the actual display.
different language can be chosen.
main parameter of the
selected test e.g. EFT
When you press the
„Main“ button the stored default values are displayed
loaded test loaded test
test parameters tests parameters
back to
programmed
tests back to
selectable tests actual showed
display
ramp selection
v, f, t,
further settings
like EUT power
voltage, EUT
failed criteria more test
parameters
•
Close the safety circuit (auxiliary connector placed, emergency button not pressed) the red lamp
signalise "Safety Circuit closed".
With the
"RUN" button the test with the default values will be started. Press again the „RUN“ button to stop
the test.