Embertec Emberplug AV, Инструкция пользователя, Страница: 3 / 20

3
Setting Up the Embertec Emberplug™ AV
1. Unplug your existing powerstrip and then plug it into the ‘Power
saver' socket.
2. Plug aV equipment that can automatically be switched off into
the powerstrip.
3. identify equipment that requires constant power for cool down
period, timers, program guides and recording features, and plug
into the sockets marked ‘always On’, or into another wall socket. a
powerstrip may also be plugged into one of the 'always On' socket.
4. Connect the supplied smartsensor cable to the side of the embertec
emberplug™ aV. ensure this is plugged in firmly.
5. Place the smartsensor in a convenient location that is in line of
sight. Close to your television is the best position, and within normal
operation of your existing remote control(s).
6. Plug the embertec emberplug™ aV into a 110V or 120V power point.
7. Power is now applied to the 'Power saver' socket. the Led monitoring
light on the embertec emberplug™ aV will light up for 3 seconds. this
also indicates that the embertec emberplug™ aV has performed a
load check.
Important
Please retain your instruction book for future use.
in the event that you need assistance with your embertec emberplug™, please
contact us on 831-708-2621 or email us at customerservice@embertec.com
alternatively, visit us on our website at www.embertec.com
Quick Connection Guide