Embertec ECEUAV, Руководство пользователя

Страница: 12 / 24

12
Using Your EmberCeptor AV™
continued
Your equipment is only protected
when all of its external connections are
connected to a single surge protector.
The LED monitoring light on the
EmberCeptor AV™ will now light up
for 3 seconds to indicate detection of
connected equipment. This also indicates
the EmberCeptor AV™ is monitoring
your power consumption and providing
power to the ‘Power Saver’ socket, then
switches off.
Your Audio Visual (AV) system
is now ready to use normally.
NOTE: Only audio visual
equipment to be connected to the
EmberCeptor AV™.
LED Monitoring Light Status
The LED light on the EmberCeptor AV™
is ON whenever power has been applied
to the Power Saver socket, and OFF when
power has been removed.
Warning:
If the
EmberSensor light flashes
frequently, it may indicate
it has sensed unwanted
infrared activity from
other appliances, such as
fluorescent lights. If this
occurs, please refer to the
Troubleshooting Guide on
pg 18.
NOTE: Please allow a few seconds
for the Standby Power in your Audio
Visual (AV) components to stabilise.