EPSILON5 MKII Programmer - User Guide V1.12 – 1
st
August 2007
viii
Produc t Doc um e nt at ion
This manual provides an overview of the contents of the EPSILON5 Programming System plus
associated hardware and software. References may be made to other hardware and software
products which are not covered in detail in this manual. Please refer to the table below for a list of
sources of documentation and/or browse to:
http://www.equinox-tech.com/products/downloadsearch.asp
Software:
EQTools Script Builder – Manual
This software is used to create and upload ‘Programming Projects’ to
the programmer.
The following sources of documentation are available for this
software:
•
Installation and Getting Started Guide (pdf manual)
•
Help
file
Upload Wizard - Standalone Project Upload Utility
This software utility is used to upload Programming Projects to any
Equinox programmer. These projects can then be used in
Standalone Mode, i.e. without a PC.
•
Please follow the on-screen instructions within the Upload
Wizard utility itself.
ASCII Text Communications Protocol – Application Note
This protocol can be used to control the programmer from an
external controller via RS-232.
The following sources of documentation are available for this
protocol:
•
Application Note – AN110 for a full description.
ConsoleEDS Pro – Application note
This software utility allows any Equinox programmer to be controlled
via simple Command Line instructions from a Command Window
within Windows.
The following sources of documentation are available for this
software:
•
Application Note 111 – ConsoleEDS Manual
