Embedded Planet Agora Скачать руководство пользователя

Страница: 20 / 48

Embedded Planet, Inc.

Agora | Product User Manual

Document Version: 1.0.0 | 11 Feb 22

Embedded Planet, Inc. | 31225 Bainbridge Rd Suite N, Solon, OH 44139 | 216-245-4180 | www.embeddedplanet.com |

Page 19 of 47

GPIO Elements

A pushbutton and an LED are included as options on Agora. Both of these components are application-

controlled; they can be programmed to function in whatever way the application calls for. These features can

be used for development and/or in end-product applications.

9.1.

GPIO Elements | Red LED

Agora features an onboard red LED controlled by programmable a GPIO pin on the nRF52840 MCU. This LED is

useful for development & debugging as well as for some end-product applications. The LED consumes a nominal

current of 4.4mA. The control signal for the LED is active-low and is connected to pin A4 (P05) of the nRF52840.

9.2.

GPIO Elements | Pushbutton

Agora features an onboard pushbutton connected to a GPIO pin on the nRF52840 MCU. This pushbutton is

useful for development & debugging as well as for some end-product applications. This pushbutton signal is active-

low. The pushbutton GPIO pin is pulled high to 3.3V through an external 1M ohm resistor. When pressed, the

pushbutton connects the GPIO pin to COM (0V). The pushbutton GPIO pin is A2 (P29) of the nRF52840.

10.

Memory

Agora supports onboard NOR flash packages controlled by the nRF52840 module. The flash module used in the

default Agora configuration is the 32Mb QSPI NOR flash W25Q32JVZPIQ by Winbond. This flash module includes the

following features:



Supports JEDEC standard manufacturer and device ID and SFDP



128-bit unique serial number



Four 256-byte Dedicated Security Area with OTP user-lockable bits

This flash module communicates with the nRF52840 MCU over QSPI lines using pins E1 (P20: IO0), E2 (P21: IO1),

C2 (P22: IO2), D1 (P23: IO3), D2 (P19: CLK), and C3 (P17: CS#).

For more information on the Winbond W25Q32JV series, please see:

https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q32JV

Red GPIO LED

GPIO pushbutton

Содержание Agora

















































Результаты поиска

Содержание Agora

Отзывы:

Похожие инструкции для Agora

Бренды по названию

Популярные бренды

Embedded Planet Agora, Руководство пользователя

Результаты поиска

Содержание Agora

Отзывы:

Похожие инструкции для Agora

Бренды по названию

Популярные бренды