emaux E-Lumen X Series, Инструкция по установке и эксплуатации

Страница: 5 / 12

INSTALLATION P4
3.3 Color mode
4. INSTALLATION
1. It is recommended to install a light every 20m, the approximate exposure area of each unit.
2. Lights should be installed in the direction that they will not shine directly into the house.
3. For training or competition pools, lights must be installed on the side to prevent swimmers from seeing any glare.
4. Nothing should be placed on the pool side directly above the lights for ease of future maintenance.
5. Cables connect between each Eagle eye and transformer must be at least 1mm² (AWG18) and the distance between them
must not exceed 150ft (50m); otherwise the lights will not function properly.
6. Qualified electrician should take the responsibility to decide wire which can fulfil operating condition for this light when
more than one Eagle eye is connect to transformer.
4.1 Wiring diagram
NO.
1
2
3
4
5
6
7
8
NO.
9
10
11
12
13
14
15
Mode Mode
Cool White
Green
Blue
Green+Blue
Red+Green
Red+Green+Blue
Mode A: Blue+Gradual Red
Mode B: Green+Gradual Red
Mode C: Blue+Gradual Green
Mode D: RGB Color Sequence
Mode E: RGB Color Sequence
Mode F: Auto Color Change
Mode G: RGB Color Sequence
Mode H: Rapid Auto Color Change
Warm White
ColorTouch Mode
Basic ON/OFF mode
Zone 1
Power cord
Zone 2
Power cord
AC Mains
Power cord
ColorTouch Control Box PCB
2