emaux E-Lumen X Series, Инструкция по установке и эксплуатации

Страница: 3 / 12

1. IMPORTANT SAFETY AND INSTALLATION INSTRUCTION
Please read the manual carefully before commencing installation. This manual important information about the correct
installation and operation of Eagle eye lights.
1. Only a qualified electrician is allowed to carry out the installation of this product.
2 Avoid direct contact with electrical power.
3 Respect all regulations in effect to prevent accidents.
4 All units are required to be disconnected from the main electricity before any maintenance.
5 For safety and proper installation, ensure that those parts supplied with the products are used.
6 Never handle with wet hands and feet.
7 This unit is designed for use only when fully submerged in freshwater, connecting with a safety transformer.
8 This product should be installed according to your local electrical installation ordinance and regulation.
9 Due to the corrosive nature of unbalanced pool chemicals, please keep your pool water acid-base balanced before
installation, and ensure the longevity of these lights.
10 If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufactory or this
service agent, or a similarly qualified person to avoid a hazard.
11 Check that there is enough cable behind the light to allow for servicing above water, preferably at ground-level poolside.
12 Never operate this underwater light for more than 1 minute unless it is submerged in water.
13 Your light requires cleaning at any time, be sure to a mild detergent or other ways that don’t damage the light.
14 Maximum Depth for light installation at 1.2 meters.
15 Maximum water Temperature Range for light operation 0 ~ 25 C.
16 The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall
be replaced.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
IMPORTANT SAFETY AND INSTALLATION INSTRUCTION P2
2. PRODUCT INTRODUCTION
EAGLE EYE is a slim high efficiency LED light with powerful 18W output. The nicheless design allows installing the light to 1.5
inch/50mm PVC pipes, suction fittings, or wall conduits. An easy-change lens cover provides a handy option for switching the
lighting effects. Eagle eye has built in Basic on/off Mode and Colortouch Mode for colour control which are fully operated
under 50Hz and 60Hz input voltage frequency. Both mode are compatable with all Emaux E-Lumen X series. The light has
individual RGB colour, warm white and cool white LEDs which provides 15 different colour mode for you to choose.
2.1 BASIC ON/OFF MODE
2.2 COLORTOUCH MODE
It needs to cooperate with ColorTouch Control Box to pick up color and adjust brightness directly. Without this control box, it
will be self-determine to basic mode when 12VAC power is connected.
When the light is direct connected to transformer, use main switch on/off to change color.
110-220Vac
to 12Vac
Transformer
110-220Vac
to 12Vac
Transformer
110-220Vac
to 12Vac
Transformer