Name of key
Description
ON
ON in any time
OFF
OFF in any time
Mode
3 static modes
:
DIM: 20%, 50%, 100% CCT: warm white, cool white, pure white
Brig
Bright up the brightness by 1024 levels. Long-press will get fast adjusting.
Brightness -
Dim down the brightness by 1024 levels. Long-press will get fast adjusting.
S1-S4
Short-pressing in single zone state to show the set state of corresponding zone;
Short-pressing in overall-control state to show the set state of all zones.
Scene setting operation:
1.
Selecting the right zone.
2.
Pressing Scene key 5 times in 5 seconds, will enter scene setting state for corresponding
zone, zone indicator light will flash.
3.
Setting the right light state with “ON/OFF”, “Bri/-“, DIM/CCT ring in 30 seconds
(will exit scene setting state automatically without saving when the time over 30 seconds
OR pressing other keys like “Z” or other Scene button).
4.
Pressing Scene key 1 time to save and finish the scene setting operation.
Tips:
1.
Scene setting operation for each zone is separately. “Scene control” will work for the
corresponding zone only in single-zone control state; will work for the all 4 zones in
overall-control state; so, it is flexible to setting up different scenes with zones.
The factory default state of Scene 1/2/3/4 is:
DIM: 10%/30%/70%/100% brightness for all zones.
Zone selection key
Zone selection, 2 seconds long-press get “all-control”, indicator lights will light up accordingly.
7.1.3 Wireless remote control code value setting method
(1) Code pairing operation: means that the receiver will only be controlled by the value code remote controller.
Ste
Operation
Instructions
1
Connecting the load to the receiver and power on it.
1. It is necessary to clear the code first, if the receiver
was coded before.
2. Batch operation can be performed within the
remote control range.
2
Select area
Select the area with the "Zone" key and the
corresponding indicator lights up
3
Press and hold “ON” on the remote control for 5 seconds, the
indicator of the remote control will flash quickly, means it enters
the pairing code transmission status.
Will automatically exit code transmission status after
60 seconds, or pressing any key to exit.
4
See the load light flashes 3 times and return to the initial state
Pairing coding is finished successfully
(2) Code clearing operation: means that the original code value of the receiver will be cleared and returned to the factory state.
Then it can be controlled by any compatible remote controller, and can learn to a new code.
Ste
Operation
Instructions
1
Connecting the load to the receiver and power on it.
1. The clearing operation should be finished within 1
minutes after the receiver is powered on. If exceeds
the time, can be powered on again.
2. Batch operation can be performed within the
remote control range.
2
Press and hold the remote control “Off” for 5 seconds. The
indicator of the remote control flashes quickly, means it enters
the clearing code transmission status. There is no need to select
the corresponding area when clearing code.
1. Will automatically exit code transmission status
after 60 seconds, or pressing any key to exit.
2. If the original remote controller is lost, the new
remote controller can be used for clearing
operations.
3
See the load light flashes 3 times and return to the initial state
Clearing coding is finished successfully
DIMMER AND REMOTE OPERATION P8
