EMAK 54019001, Инструкция для оператора

Страница: 24 / 130

20
I
GB
F
D
E
SK
P
GR
TR
CZ
RUS
UK
PL
USE ONLY ORIGINAL PARTS
WA R N I N G ! A l s o r e a d t h e b a t t e r y
and battery charger instruction and
maintenance manual!
WARNING! B efore per forming any
cleaning or repair procedures, stop
the motor, disconnect the battery and
disconnect the safety connector (12, Fig.2).
MAINTENANCE OF THE CUTTING EQUIPMENT
EXTRA MAINTANANCE ADVISABLE
It is advisable to inspect the machine by a
specialized technician at an authorized service
network at the end of season, if used
intensively, and every two years if with normal
use.
W A R N I N G ! – A n y m a i n t e n a n c e
operations not specifically dealt with
in this manual must be carried out by an
authorised service centre.
To ensure that your
lawnmower continues to function correctly, use
only
ORIGINAL REPLACEMENT PARTS.
Any unauthorized changes and/or
use of non-original replacement parts
may result in serious injury or death to the
operator or third parties.
Take care when handling the blade.
Always wear protective gloves.
- Clean mower thoroughly after each mowing.
- Keep a sharp edge on the blade.
- A blade without a sharp edge will not make a
good cut.
A worn or damaged blade can be
dangerous: replace it.
BLADE (Fig. 20)
WARNING – Work with protective gloves
when checking the condition of the
blade. Use caution because the blades may
rotate even when the motor is not running.
WARNING – Periodically check that the
bolt (A, Fig.20) is tightened to 25 Nm
(2.5 kgm).
If the grass mowing becomes unsatisfactory as
time goes by, the blades probably need to be
sharpened. A poorly sharpened blade pulls out
the grass and makes the lawn turn yellow. If the
blades are damaged or crooked, they have to be
replaced.
- Sharpening the blades is a very delicate
operation. If their perfect balance is not taken
into consideration, they can cause abnormal
vibrations that cause the blades to become
loose, with consequent danger for the
operator.
- The blades must be assembled with the right
angle. Erroneous assembly can cause
incorrect tightening, with consequent
loosening of the blades when working, with
dangerous consequences for the operator.
This is why the blades must be balanced and
replaced by one of our
Authorised Assistance
Centres .
WA R N I N G : N eve r re p a i r d a m a g e d
c u t t i n g a t t a c h m e n t s b y we l d i n g,
straightening or modifying the shape. This
may cause parts of the cutting tool to come
off and result in serious or fatal injuries.
WARNING – Always also replace the bolt
(A, Fig.20).
GRASS CATCHER
Stop the motor and remove the safety
plug (13, Fig.2) or safety connector
(12, Fig.2) before removing the grass catcher
or cleaning the grass discharge chute.
Frequently check to ensure the grass catcher is
fitted correctly and is not damaged. Check that
the openings in the grass catcher grille are not
clogged; if necessary, wash the grass catcher
with water and allow it to dry completely before
refitting it. If you work with a damaged grass
catcher or with the openings in the grille
clogged, its capacity will be reduced.