EMAG Emmi-Nail LED Compact, Руководство по эксплуатации

Страница: 7 / 8

7
ENGLISH
1. Description
The future technology in your nailstudio. This LED-lamp hardens effi cient LED gels and UV-Polish in se-
conds. You have desided for a cost-saving product because there is no more need to change tubes. The
lifetime of LEDs is up to 50.000 hours. The LED Compact is equipped with four high-powered LEDs and a
timer set for 15/30/60 seconds.
1. power cable and plug
2. Chosen time (15/30/60 seconds) 3. bothe side usable
4. 4 high-powered LEDs
2.
4.
1.
3.
3.
3. Conventional Use
The equipment may only be used for the purpose as set forth in
the catalogue and in the technical descriptions which means for
light curing of nails. In case of non conventional use EMAG AG
will not be liable for possible damages and will not warrant for
the correct and functional work of the components.
Part of the conventional use is also the observance of all informa-
tion given in the operating manual. The correct and safe
operation of the equipment implies appropriate transportation,
storage, installation and assembly as well as careful handling and
maintenance.
4. Non Conventional Use
The equipment may only be used for the purpose as set forth in the catalogue and in the technical
descriptions which means for light curing of nails, and only in conjunction with external devices and
com ponents which are recommended or approved by EMAG AG. Any other use of the equipment is con-
sidered to be non conventional. In case of non conventional use EMAG AG will not be liable for possible
damages and will not warrant for the correct and functional work of the components. Part of the con-
ventional use is also the observance of all information given in the operating manual. The correct and
safe operation of the equipment implies appropriate transportation, storage, installation and assembly
as well as careful handling and maintenance.
5. Operating Instructions
In case of non conventional use EMAG AG will not be liable for possible damages and will not warrant for
the correct and functionally work of the components.
In order to avoid non conventional use of the light curing equipment the following directions are to be
considered:
• The light curing equipment may only be operated with the voltage printed on the type plate on the
backside / bottom side of the housing (shockproof socket).
• No fl ammable or aggressive chemicals (i.e. acids etc.) must be used for cleaning of the equipment.
• During cleaning process the power supply must be disconnected.
• The equipment must only be operated indoor.
• In case of transportation damage , don `t connect the equipment with main source.
• Please use only the orginal mains adapter.
2. Technical Data
LED Compact
Length (mm) 145
Width (mm) 65
Height (mm) 60
timer (sec.) 15/30/60
Power supply
(V~/Hz)
230V~/15V=
50/60 Hz
Protection class IP20
Technical changes reserved!