eMachines E4264, Справочное руководство

Страница: 96 / 124

Chapter 6: Troubleshooting
90
4
Click the software or driver you want to recover, then
click
Next .
Recovering pre-installed software and drivers using
recovery discs
If you created a multiple-disc set of recovery discs, each disc
contains a unique set of software and drivers. If a recovery
disc does not offer the software or driver you need to recover,
try another disc.
To recover software and drivers using recovery discs:
1
Insert a software and driver recovery disc into a CD/DVD
drive. If an
AutoPlay dialog box appears,
click Run Erc_Vista.exe .
The disc’s eMachines Recovery Center starts.
2
To recover pre-installed software, click Application
recovery , click the software you want to recover, then
click Next .
- OR -
To recover pre-installed device drivers, click Device
driver recovery , click the type of driver you want to
recover, then click Next .
3
If the software or driver is not shown on the list, and
you have a multiple-disc set of recovery discs, close
eMachines Recovery Center and try another disc.
Using Microsoft System Restore
Microsoft System Restore periodically takes “snapshots” of
your system settings and saves them as
restore points . In
most cases of hard-to-resolve software problems, you can
return to one of these restore points to get your system
running again.
Windows automatically creates an additional restore point
each day, and also each time you install software or device
drivers. You can also create a restore point manually. For
instructions, see
“Manually creating a restore point” on
page 92 .
8512042.book Page 90 Monday, December 18, 2006 10:15 AM