eMachines E 600, Руководство пользователя

Страница: 9 / 34

9
OPERATING INSTRUCTIONS
1. Premix cleaning solution with hot water in a 20 litre pail. Pour mixed solution in
solution tank of unit.
NOTE: Do not mix more solution than you will need for the job.
2.
Connect vacuum and solution hoses to unit.
3.
Insert plug into 3 pin grounded outlet. Try to use an outlet in a hallway or
adjoining room in order to keep electrical cord out of your way.
4.
We recommend the use of a liquid defoamer, to prevent the machine from
prematurely shutting off due to excess foam in the recovery tank. Turn on
vacuums and pour approximately ¼ cup of Esteam Liquid Defoamer into the
end of the vacuum hose.
5.
Connect vacuum and solution hoses to carpet cleaning wand.
6.
Proceed to clean carpets.
NOTE: To prevent over wetting we recommend two dry passes (vacuum only)
for every one wet pass (applying solution to carpet).
7. When the recovery tank becomes full, vacuums will automatically stop
extracting. When the vacuums have stopped extracting they will make a
distinctive high-pitched noise, as all airflow will be cut off. At this time switch
unit off. Drain the recovery tank by pulling up on drain valve on front of
machine.
NOTE: Ensure that the automatic high water shut off screen inside recovery
tank is free from any obstructions. Be sure to close drain valve before
resuming cleaning.
8. To empty solution tank remove vacuum hose from wand. Turn one vacuum on
and extract extra solution from solution tank into recovery tank, then drain
recovery tank.
NOTE: Do not completely submerge end of vacuum hose into solution. Allow
some air to enter end of vacuum hose with liquid.