EM Acoustics ST-215, Руководство пользователя

Страница: 10 / 57

Page 10 of 57
ST-215 User Manual
v2 November 2019
4.0 - Safety Considerations
System Overview
The flying system for the ST-215 has been specifically designed to be flexible, intuitive and reliable.
Please read this section of the user manual
extremely carefully as the rigging of loudspeakers is a
very serious matter with potentially fatal consequences should anything go wrong. If you are in
ANY DOUBT WHATSOEVER , contact a reputable rigging company or your local EM Acoustics
representative.
IMPORTANT SAFETY CONSIDERATIONS
The ST-215 rigging system has been designed and constructed to a very high standard of safety,
and tested to demanding specifications. To ensure the highest standards of safety, the following
information on array assembly must be exactly followed and understood.
Only use EM Acoustics recommended rigging hardware and accessories, which are specifically
designed for the purpose. Do not use ST-215 flying hardware for any other loudspeaker system –
the components are specifically designed to work with the ST-215 product and are not
interchangeable with any other EM Acoustics loudspeaker product or any other loudspeaker system
unless clearly specified. The use of ST-215 flying hardware with other manufacturers’ systems may
compromise the safety standards and EM Acoustics is in no way liable for any loss, damage or injury
caused by such practice.
Do not modify or alter the ST-215 hardware or accessories, nor use them in any way other than that
described in this manual. Rigging components supplied as part of the ST-215 system are in no way
interchangeable and should not be used as such.
The component parts of the ST-215 rigging assembly should only be assembled in the manner
described in this manual, using the fasteners and fixings stated herein. The use of fasteners and
methods of assembly not described in this manual may result in an unsafe assembly and as such
EM Acoustics will not be responsible for any loss, damage or injury caused by such practice. Welding,
drilling or any other means of modifying any part of the flying hardware or permanently fixing
components to each other is strictly forbidden.
Rigging assemblies must only be assembled using the appropriate parts and fixings as described in
this manual, explicitly following the assembly instructions given herein. Rigging components must
only be fixed to EM Acoustics ST-215 subwoofers, using the correct cabinet location points,
assembly methods and fasteners specifically described within this manual.
Walls, floors and ceilings must be capable of supporting the actual load placed upon them. The
rigging hardware must be safely and securely fixed to both the loudspeaker system and the
supporting structure.