background image

1

HS10SUB

I n s t r u c t I o n   M a n u a l

Introduction

Thank you for purchasing a 

SLS

 Subwoofer. When properly installed, 

this subwoofer will provide you with years of outdoor entertainment 
pleasure. To get the most out of your new subwoofer, please read 
this manual thoroughly before you begin installation.

Box Contents

SLS

 Hardscape Subwoofer box contains: 

(1) Hardscape Subwoofer 
(2) Silicon Filled Wire Nuts

Subwoofer Location Selection

The 

SLS

 is designed to deliver a seamless, evenly dispersed sound 

field  in  an  ‘open  air’  environment.  An  array  of  multiple  Satellite 
speakers and Subwoofers should be strategically placed to 
minimize  ‘hot  spots’  and  ‘nulls’  as  you  move  around  the  outdoor 
entertainment area 

as a general guideline, (1) subwoofer will cover about 2000 

square feet of listening area

Figure 1 Shows The 

SLS

 placed along the perimeter of the 

entertainment area. 

Select a central location for the subwoofer if using only one subwoofer 
(see figure 1) if using multiple subwoofers, select locations that are 
the same distance from the main listening area. 

Figure 1

Amplifier Power Planning 

The maximum number of satellites and subwoofers that can be 
used in a system will depend on the amplifier power available.

Before beginning an installation use the chart below to calculate 
the  amplifier  power  your  installation  will  require.  Multiple 
amplifiers may be required in large installations.
 

HS10SUB Subwoofer

Patent Pending

Subwoofer

model

qty. ch1 qty. ch2 x

watts

total ch1 total ch2

LS47SAT

x

25 

LS67SAT

x

25

LS10SUB

x

100

LS12SUB

x

100

HS10SUB

x

100
total
20% 
head 
room

TOTAL MINIMUM WATTAGE

Wattage Calculator

Amplifier Selection

For systems up to 500w per channel use the CROWN CDI 1000
For systems up to 800w per channel use the CROWN CDI 2000
For systems up to 1000w per channel use the CROWN CDI 4000

Содержание HS10SUB

Страница 1: ...ows The SLS placed along the perimeter of the entertainment area Select a central location for the subwoofer if using only one subwoofer see figure 1 if using multiple subwoofers select locations that are the same distance from the main listening area Figure 1 Amplifier Power Planning The maximum number of satellites and subwoofers that can be used in a system will depend on the amplifier power av...

Страница 2: ... until all connections are completed High power 70volt amplifiers present a serious shock hazard Do not connect speaker wires to the amplifier until all other connections are completed 4 Dig a 4 5 deep trench to run the speaker wires in 5 Run the wire through the trench from your amplifier to the first speaker location 6 Connect the direct burial wire to each speaker wire connections should be mad...

Страница 3: ... 100Hz 3dB Power Required 100 watts Enclosure Material HDPVC High Density Polyvinyl Chloride Non corrosive sealed enclosure Crossover 100Hz Available Finishes Dark brown textured enclosure Dimensions Enclosure 13 5 wide 13 5 deep 14 high 34 29cm x 34 29cm x 35 56cm Shipping Weight 42 lbs 19 kg 14 13 5 13 5 ...

Страница 4: ... disclaimer of implied warranties the duration of such implied warranties is limited to period of Sonance s express warranty Your Product Model and Description SLS HS10SUB Warranty Period for this Product Five 5 years from the date on the original sales receipt or invoice or other satisfactory proof of purchase Additional Limitations and Exclusions from Warranty Coverage The warranty described abo...

Отзывы: