9
i-2 User Manual
www.emacoustics.co.uk
Attachment of the YK-i2 vertical hanging yoke
Using a flat-blade screwdriver, remove the two M8 countersunk bolts on the flat side of the enclosure (marked “A”
in Fig 1). Position the YK-i2 mounting plate over the two holes, reinstate the bolts and tighten securely. There are
three hole positions for an attachment device in the top of the yoke (marked “B” in Fig 2). For permanent
installation, these can be used to fix the YK-i2 directly to a surface. For temporary installation, a standard hook
clamp is recommended. Attach this clamp or other suitable device using an M10 bolt, nut and washer set. The i-2
can now be securely suspended and oriented as required. By rotating the YK-i2 through 180 degrees, it can be
used to allow down-tilt or up-tilt when using a microphone stand (Fig 3).
