elysator PUROTAP profi 1 Series, Инструкция по установке, функционированию и обслуживанию, Страница: 8 / 15

8
6. Let the resin run into the collection bag, let any water drip out and
dispose of the bag with household waste.
7. Close the ball valve at input (2).
8. Remove the hose from drain valve (13) and replace the mesh filter.
The hose on the drain valve must not be connected to a water-filled
system.
5.1.2. Filling the resin canister
1. Undo the couplings on reinforced hoses (7) at the lower end, i.e. on the
device (not the head).
2. Grip head (8) with both hands and unscrew it from resin canister (9).
3. Remove the head with immersion pipe (8) from the resin canister.
4. Use the funnel to fill PUROTAP® HF highpower or PUROTAP® HF nexion
resin into the resin canister (PUROTAP® profi 25.1 - 2 bags @ 12.5 l,
PUROTAP® profi 50.1 - 4 bags @ 12.5 l).
5. Clean the threads with water. Insert the head with the immersion pipe
centrally aligned into the resin canister, and screw it down by hand
(floating resin will make centring the pipe much easier).
un
sp
en
t
14
8
7
9