7
Technical Specifications
HOTRUN X range TECHNICAL SPECIFICATIONS
Power Settings
X6
X11
X21
HOTRUN model
2.8/3.8/4.8/6.0 kWatt
7.6/8.6/9.6/11 kWatt
12/15/18/21 kWatt
1-Phase 230/240 V
1- phase 230/240V OR
2- phase 230/240V
3-phase 400/415 Volt
1-Phase: 16, 20 or 25 Amp
3-Ph 16, 20, 25 or 32Amp
Current
1-Phase: 32, 36, 40 or 50 Amp
2-Phase: 2 x: 16,18, 20 or 25 Amp
Voltage
Legionella Cleaning Cycle
A service technician can program a HOTRUN-X model to run through a Legionella Cleaning
Cycle. The purpose of the Legionella Cleaning Cycle is to provide a thermal disinfection of
fixtures downstream of the HOTRUN water heater. A cycle will run for 10 minutes at a
temperature of >65°C as per the current Australian Health Ministers' Regulations and
directions given to ELWA in every State of Australia. ELWA can organise this service for all
customers who have a HOTRUN model installed with models produced from 2015 onwards.
During the Legionella cleaning cycle the display shows the count-down time of the cycle
(600 seconds/10mins) until completion, and then remembers all its previous settings for
normal operation.
The ELWA Legionella cleaning cycle is patented by ELWA.
Maintenance
- Due to its advanced design the HOTRUN does not require any maintenance.
- To clean cover, use damp cloth only.
- Scouring and dissolving agents are not suitable.
- Regularly remove debris or scale building up in shower heads and in tap-aerators.