manualshive.com logo in svg

Elvox 5721, Руководство по установке

Поделиться
Скачать
Elvox 5721 Скачать руководство пользователя страница 7

5

Technical characteristics

Power consumption.

The consumption of the video door entry unit 5721 depends on the device's current mode of operation (with or 
without a call in progress).
The mean values of the power input in the typical modes of operation are the following:

•  Video door entry unit 5721:

- with a call in progress (video door entry unit on video communication): 175 mA.
- with no call in progress (video door entry unit on stand-by): 60 mA.

•  Video door entry unit 5721/D:

- with a call in progress (video door entry unit on video communication): 175 mA.
- with no call in progress (video door entry unit on stand-by): 60 mA.

N.B. The above values are approximate.

Power supplies and other Due Fili (Two-Wire) accessories.  

The power supplies and other accessories that can be used for installing the system are those of the Due Fili 
(Two-Wire) range; in particular, the following items are recommended:

• 6922 

(basic video door entry unit power supply)

• 6923 

(additional power supply for entrance panels and monitors)

• 6852 

(power supply for additional video cameras)

• 692S  

(separator for the division of conversation areas)

• 692C  

(concentrator for connections of up to 4 entrance panels, of which at least one is a video door 

entry version)
• 69AM 

(audio/video interface module for external video camera)

• 69AM/4   (expansion module for 4 video cameras with audio input to be connected to 69AM) 
• 692D/2 

(active video floor distributor to adapt impedance of video signal)

• 692D 

 

(passive video distributor)

• 69RH 

(digital relay with 2 independent contacts and maximum load of 3A 230V per contact)

• 69PH          

(digital relay with 2 independent contacts and maximum load of 6A 230V per contact 

AC1)

As regards all the technical characteristics (supply voltage, current delivered, power input, description of termi-
nals, etc.), of the above devices, please see the relevant instruction sheets.

Содержание 5721





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды