20
EN
2
Hardware Installation
2.1
Install Hard Drive
Check the unit and the accessories after getting the DVR. Please don’t power up the unit till the physical installation is complete.
Notice:
1. This series support one SATA hard drive. Please use the hard drive the manufacturers recommend specially for security and safe field.
2. Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate Recording Capacity”.
1. Loosen the screws on the back and side
2. Take out the HDD.
3. Put the HDD on the bottom of the device.
4. Turn over the device and fix the HDD with the screws.
5. Connect the power and data cables.
6. Install the cover back and fix it with the screws.
2.2 Front Panel Descriptions
The front panel descriptions are only for reference; please make the object as the standard.
Front panel I
Name
Description
REC
When recording, the light is blue
Net
When access to network , the light is blue
Power
Power indicator, when connection , the light is blue
Fn
Switch the resolution of the VGA or HDMI output
