46516.212.01
Istruzioni
User manual
49400962A0 00 15 12
VIMAR - Marostica - Italy
Vimar SpA: Viale Vicenza, 14
36063 Marostica VI - Italy
Tel. +39 0424 488 600 - Fax (Italia) 0424 488 188
Fax (Export) 0424 488 709
www.vimar.com
720P AHD IR Bullet camera, 2.8-12 mm lens
SPECIFICATIONS
Model
46516.212.01
Sensor
720P Sensor
Effective Pixels
1296(H)x732(V)
Video Frame Rate
25/30fps@720P
Max.transmission distance
500 m with 46364.500
Video format
PAL
Mini-illumination
0 Lux (IR ON)
S/N Ration
More than 50dB (with AGC OFF)
BLC
Auto
AGC
Auto
NR
Auto
White Balance
Auto
Day/Night
Support ICR
Sync code
Internal
Voltage
12 Vdc
Current
700mA ±15%(IR ON); 75mA ±15%(IR OFF)
IR-CUT
Auto
Lens
2.8-12 mm HD Lens
IR range
50 m
Waterproof standard
IP66
Video output
AHD/CVBS
Storage temperature
-20°C ~70°C
Operate Temperature
-10°C ~50°C RH90% MAX
Size
261(L) * 118(H) * 76(W) mm
Weight
865g
*Specifications subject to change without notice.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
1. Use the Appropriate Power Supply
The input power for the camera is 12Vdc. Be sure to connect it to the
appropriate power. Wrong connection may cause malfunction and/or
damage to the video camera.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no
user serviceable parts inside. Ask a qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could
be damaged by improper handling or storage.
4. Do note use strong or abrasive detergents when cleaning the camera
body. Use a dry cloth to clean the camera when dirty. In case the dirt is
hard to remove. Use a mild detergent and wipe gently.
5. Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive deter-
gents.Use a piece of lens tissue or cotton tipped applicator and ethanol.
6. Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely brighto-
bjects that causes mear to appear irrespective of whether the camera is
operating or not. This can damage the sensor.
7. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communi-
cation device which emits strong electromagnetic field, some irregularity
such as noise on monitor screen may happen.
FEATURES
- 1.0 Megapixel high performance CMOS sensor with 25/30 fps@720P,
no compressed, no delay, and real-time transmission image
- Built in IR-CUT, ensure the camera work properly both day and night.
- New material, IP66 waterproof standard, anti temperature, anti impact,
anti UV.
- New material, IP66 waterproof standard, anti temperature, anti impact,
anti UV.
- Long-life IR LED design, whose brightness is several times higher and
service life longer than ordinary LED’s
- SMART-IR, 50 meters IR range.
- Image transmission up to 500 meters
PARTS INSTRUCTION AND INSTALLATION
DESCRIPTION
The waterproof camera adopt 1.0 megapixels 720P@25/30fps high perfor-
mance sensor, no compressed, no delay, and real-time transmission image.
The camera adopt new material with IP66 waterproof standard, IR-CUT
filter, smart-IR control. Fashionable and professional design.
ATTENTION
Thank you for your purchasing this product. Before attempting to connect
or operate this product, please read these instructions carefully and save
this manual for future use.
DIMENSIONS (mm)
Camera Installation
1. Fix the camera to the needed place with the four pieces of screws.
2. Loosen the horizontal adjusting ring, adjust it to the needed place, then
fix the horizontal adjusting ring.
3. Loosen the angle fixing screw, adjust it to the needed place, then fix the
angle fixing screw
70.0
m
m
5.0m
m
BNC (video output)
Power
261
170
9
4
11
8
Ø76
∅
80
1
2
3
IRFXV
zoom
261
170
9
4
11
8
Ø76
∅
80
1
2
3
IRFXV
zoom
Focus Zoom
261
94
170
11
8
ø76
ø80
1
2
3
Long-effective IR Light Source Design
Other brands
Service Life
IR Sensnsitivity
1 yr
2 yr
3 yr
4 yr
AHD
CVBS
UP
Hold to the right to set the camera
in AHD, hold to the left to set the
camera in CVBS.
