elvita CTT3802V, Руководство пользователя

Страница: 28 / 36

28 Troubleshooting
© 2021, Elon Group AB. All rights reserved.
Problem Cause Remedy
Laundry is not dry enough or drying
took too long Door filter and heat exchanger needs
cleaning Clean the door filter, see
section "Clean the door filter",
page
23 . and heat exchanger, see
section "Clean the heat exchanger",
page 25
The installation area does not fulfill the
requirements Adjust the installation area or move
the dryer
Air inlet is not clean Keep the air inlet clean
The selected drying programme and
settings was not appropriate If possible, adjust the dryness level
and/or the drying time. Consider
selecting another drying programme.
Drain hose needs cleaning Clean the drain hose
Water container is full Pour out the condensate water
The dryer turns off at the end of the
programme The dryer turns off automatically for
energy saving This is not an error but a normal
function
Abnormal noises The compressor is operating These noises are normal and do not
indicate any errors
The machine is not levelled Level the machine. See section "Level
the tumble dryer",
page 31
Error messages
Message Cause Remedy
E32 Humidity sensor error Contact your local service center if the
problem occurs
E33 Temperature sensor error
Water pump failure or water level
sensor failure
Container is full Empty container
Filter is blocked or ambient
temperature is too high Clean the filter and check the ambient
temperature
Contact your local service center if the
problem persists
NOTE!
If your machine needs repair, consider repairing it. Repairing instead of buying new is good for the
environment.
The spare parts listed in the EU regulation 2019/2023 will be available to professional repairers at least 10
years after this product was placed on the market.