Cleaning
25
© 2020, Elon Group AB. All rights reserved.
1.
Turn off the tap and remove the water supply hose from the tap.
2.
Clean the filter.
3.
Refit the water supply hose to the tap and turn on the tap.
Clean the machine inlet filter
The machine inlet filter must be cleaned if the water supply becomes restricted.
1.
Turn off the tap and unscrew the inlet pipe from the rear of the machine.
2.
Remove the inlet pipe.
3.
Clean the filter with a brush.
4.
Refit the inlet pipe and turn on the tap.
The filter can be removed and washed separately.
Clean the drain pump filter
The drain pump filter is designed to trap fibres and small foreign objects. Clean the filter periodically to ensure the normal
operation of the machine.
WARNING!
Unplug the machine before you clean the filter to avoid electrical shock.
WARNING!
•
Be careful. The water may be hot!
•
Allow detergent solution to cool down before you clean the filter.
CAUTION!
Never remove the pump cover during a wash cycle. Always wait until the machine has finished the cycle, and
is empty.
