23
© 2022, Elon Group AB. All rights reserved.
Use a screwdriver to secure the hood to the cabinet.
This must be
done from below using the suspension mechanism.
().
Mounting with angle bracket
1- Angle bracket
2- Screws for angle brackets
Secure the angle brackets with the screws on the side
of the cabinet to fit the hood ().
Now mount the product using screws directly on the
angle brackets at points A, B, C & D ().
Note: New holes can be drilled for the angle brackets
on the hood if the existing ones cannot be used. Note:
The method of mounting with the angle brackets can
be followed in reverse, where the angle brackets are
first mounted on the hood, where the hood together
with the angle brackets are then screwed onto the
cabinet.
Fig. 15
Fig. 16
Fig. 17
12
B
A
C
D
