© 2022, Elvaco AB. All rights reserved. The documentation and product are provided on an “as is” basis only and may contain deficiencies or inadequacies.
Elvaco AB takes no responsibility for damages, liabilities or other losses by using this product. No part of the contents of this manual may be transmitted
or reproduced in any form by any means without the written permission of Elvaco AB. Printed in Sweden.
CMi6140 Quick manual English
Version: 1.4
SAFETY
The following safety precautions must be observed during all phases of the operation, usage, service or repair of any CMi Series product. Users of the
product are advised to convey the information to users and operating personnel and to incorporate these guidelines into all manuals supplied with the
product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Elvaco AB assumes
no liability for customer’s failure to comply with these precautions.
CMi6140 receives and transmits radio frequency energy while switched on. Remember that interference can occur if the product is used close to TV sets,
radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off the product wherever forbidden, or when
you suspect that it may cause interference or danger.
The device or antenna of the product must not be mounted closer than 0.5 m from areas where people are staying permanently in order not to risk
exposing people to RF fields.
To use the product’s NFC TAG, follow the instructions issued by the manufacturer of the NFC reader for safe and efficient operation.
Ensure yourself that power supply and/or battery-unit connected to CMi6140 fulfil EN 62368-1 or equivalent safety standard.
For guaranteed lifetime of a battery-operated device, configuration and settings must be approved by Elvaco and not changed during the lifetime of the
device.
TECHNICAL SPECIFICATIONS
Mechanics
Dimensions (w x h x d)
90 x 35 x 12 mm
Mounting
In module slot of Kamstrup Multical®
403/603/803
External antenna
connector
MCX (female)
SIM card
Slide, size Nano
Electrical connections
Supply voltage
HC99303 230 VAC high power supply
HC99305 D-cell battery IoT
HC99306 C-cell battery IoT
Electrical characteristics
Nominal voltage
3.5 VDC
Power consumption (max)
300 mA
Power consumption (sleep
mode)
8
µA
Environmental specifications
Operating temperature
+5 °C to +55 °C
Operating humidity
0 - 93 % RH, no condensation
Operating altitude
2000 m
Pollution degree
Degree 1
Usage environment
Indoors
Storage temperature
-20 °C to +60 °C (Module)
Mobile network
Band
20, 8, 3
3GPP
Release 14 (NB2)
User interface
Configuration
• NFC via Elvaco OTC App
• Via LwM2M (Elvaco Evo DM-system,
or third-party DM-system)
• Preconfig on delivery
CONTACT INFORMATION
Elvaco AB Technical support:
Phone: +46 300 434300
E-mail: [email protected]
Online: www.elvaco.com
