background image

 

 

CMi4110 User’s Manual English v1.3 

 

 

 

 

 

 

 

 

 

 

 

 

CMi4110 User’s Manual English v1.3 

page | 9 (27) 

[2018-06] 

 

 

 

V1.3

 

 

 

5.3.3  Start-up and LED indications 

Module activation 

Upon delivery, CMi4110 is set to passive mode, which means no messages will be transmitted from the 
module. There are two ways to activate the module: 

1.  Press down the push button (2) for at least 5 seconds until the green LED lights up, then release 

the button. A few seconds (1 to 11 seconds) later, CMi4110 will indicate start-up by flashing red 
and green LEDs for one second. 

2.  Via the Elvaco OTC app. Go to 

Apply mode

, set the Module power to “active” and click 

Apply 

settings. 

Place the phone on the right side of the meter. The mobile phone should vibrate three 

times. This indicates that settings have successfully been applied. 

 

Network join 

After activation, CMi4110 will attempt to join the LoRaWAN network. The phase is indicated by short 
flashes every 5

th

 second on the green LED. When CMi4110 succeeds in joining the LoRaWAN network, 

the green LED will lighten up for 8 seconds, as illustrated by Figure 1.  
 
If the module fails to join the LoRaWAN network 6 times, it will wait for 60 minutes before another join 
attempt is initiated in order to conserve battery. A new join attempt cycle can be manually started anytime 
by pressing down the push button (2) for at least 5 seconds, until the green LED lights up, and then 
release the button. 

When the module has joined the LoRaWAN network, meter data will initially be transmitted from the 
module every minute (regardless of transmit interval settings) in order to set the right data rate. After 10 
minutes of calibration, the module will start to deliver meter data using its configured settings.   
 

 

Figure 1: Network join LED indication 

 

 

When  activation-by-personalization  (ABP)  is  used,  the  module  does  not  perform  a  join 
operation before sending messages. Therefore, the 8-second indication of connection will 

not

 appear in ABP mode.  

 

Soft start  

In rare cases, if the battery is weak, the module will perform a soft start to be able to start-up despite the 
condition of the battery. The soft start takes 10 minutes to complete. The red LED will blink shortly every 
10

th

 second until the start-up has completed. 

 

 

Figure 2: Soft start LED indication 

 

Содержание CMi4110




























Отзывы: