23
5. General function
This energy-saving controller for radiators can be used to
control room temperature on the basis of time. The ac-
tuator moves a valve, thereby allowing the amount of
heat flowing to the heating appliance to be controlled.
The controller is compatible with all standard heating
appliance valves. The large illuminated display ensures
user-friendly operation. A wireless receiver allows the
device to receive commands from taught-in system com-
ponents. The use of BABY cells means that the unit is
practically maintenance-free. The anti-tamper and theft
protection device prevents unauthorised dismantling.
Installation can be achieved in 4 easy steps.
6. (Step 1) Inserting (replacing) the batteries
Remove the ba
•
ttery compartment cover.
Insert 2 new LR14 batteries (Baby/C) into
•
the battery compartment, ensuring they
are the right way round.
Reattach the battery compartment cover
•
and click into place.
New alkaline batteries have a life of ap-
proximately five years. A battery symbol (
) will in-
dicate when the batteries need to be replaced. Before
changing the batteries, you must remove the anti-theft/
tamper protection device. After removing the old batter-
ies, please wait approximately 1 minute before inserting
the new ones. This device does not support operation with
rechargeable batteries.
Never recharge standard batteries.
Doing so will present a risk of explosion.
Do not throw the batteries into a fire.
Do not short-circuit batteries.
